How to hack a computer with IP address

There are plenty of papers out there that go into how to obtain an IP Address from the preferred mark of your choice. So I’m not going to go into that subject. Alright so say we got the targets IP Address finally. What do we do with this IP Address. Well first ping the IP Address to make sure that its alive. In other words online. Now at the bottom of this document I have included some links where you can obtain some key tools that may help on your journey through the electronic jungle. So we need to find places to get inside of the computer so we can start trying to find a way to “hack” the box. Port Scanners are used to identify the open ports on a machine that’s running on a network, whether its a router, or a desktop computer, they will all have ports. Protocols use these ports to communicate with other services and resources on the network.

1) Blues Port Scanner
This program will scan the IP address that you chose and identify open ports that are on the target box.

Example 1:

In example 1 now we see that there are a variety of ports open on this box. Take note of all the ports that you see listed before you. Most of them will be paired up with the type of protocol that uses that port (IE. 80-HTTP, 25-SMTP,  and so on…) Simply take all that information and paste it into notepad or the editor of your choice. This is the beginning of your targets record. So now we know what ports are open. These are all theoretical points of entry where we could wiggle into the computer system. But we all know its not that easy. Alright so we don’t even know what type of software or what operating system that this system is running.

2) NMAP – Port Scanner
Has unique OS fingerprinting methods so when the program sees a certain series of ports open it uses its best judgement to guess what operating system its running. Generally correct with my experiences.

So we have to figure out what type of software this box is running if we are gonna start hacking the thing right? Many of you have used TELNET for your MUDS and MOOS and weird multiplayer text dungeons and many of you haven’t even heard of it before period. TELNET is used to open a remote connection to an IP Address through a Port. So what that means is we are accessing their computer from across the internet, all we need is their IP Address and a port number. With that record you are starting to compile, open a TELNET connection to the IP Address and enter one of the OPEN ports that you found on the target.
So say we typed ‘TELNET -o xxx.xxx.xxx.xxx 25′ This command will open up a connection through port 25 to the IP xxx.xxx.xxx.xxx. Now you may see some text at the very top of the screen. You may think, well what the hell, how is that little string of text going to help me. Well get that list you are starting to write, and copy the banners into your compilation of the information youve gathered on your target. Banners/Headers are what you get when you TELNET to the open ports. Heres an example of a banner from port 25.

Now this is a very important part in the enumeration process. You notice it says ‘Sendmail 8.12.8/8.12.8′
Well what do you guess? we now have discovered a version number. This is where we can start identifying the programs running on the machine. There are some instances in which companies will try and falsify their headers/banners so hackers are unable to find out what programs are truly installed.

3) Netcat – Network swiss army knife
Like TELNET only better and with a lot more functionality. Both can be used when you are trying to fingerprint software on open ports. 

Now just copy all the banners from all the open ports (Some Ports May Have No Banners) and organize them in the little record we have of the target. Now we have all the open ports, and a list of the programs running and their version numbers. This is some of the most sensitive information you can come across in the networking world.
Other points of interest may be the DNS server, that contains lots of information and if you are able to manipulate it than you can pretend to be gmail, and hack a bunch of people’s email. Well now back to the task at hand. Apart from actual company secrets and secret configurations of the network hardware, you got some good juicy info. http://www.securityfocus.com is a very good resource for looking up software vulnerabilities.
If you cant find any vulnerabilities there, search on google. There are many, many, many other sites that post vulnerabilities that their groups find and their affiliates.

At SecurityFocus you can search through vendor and whatnot to try and find your piece of software, or you can use the search box. When i searched SecurityFocus i found a paper on how Sendmail 8.12.8 had a buffer overflow. There was proof of concept code where they wrote the shellcode and everything, so if you ran the code with the right syntax, a command prompt would just spawn. You should notice a (#) on the line where your code is being typed. That pound symbol means that the command prompt window thats currently open was opened as root. The highest privilege on a UNIX/Linux Box. You have just successfully hacked a box. Now that you have a command shell in front of you, you can start doing whatever you want, delete everything if you want to be a fucking jerk, however I don’t recommend that.
Maybe leave a text file saying how you did it and that they should patch their system…..whoever they are. And many times the best thing you can do is just lay in the shadows, don’t let anyone know what you did. More often than not this is the path you are going to want to take to avoid unwanted visits by the authorities.

There are many types of exploits out there, some are Denial of Service exploits, where you shut down a box, or render an application/process unusable. Called denial of service simply because you are denying a service on someones box to everyone trying to access it.
Buffer Overflow exploits are involved when a variable inside some code doesn’t have any input validation. Each letter you enter in for the string variable will be 1 byte long. Now where the variables are located at when they are in use by a program is called the buffer. Now what do you think overflowing the buffer means. We overflow the buffer so we can get to a totally different memory address. Then people write whats called shellcode in hex. This shellcode is what returns that command prompt when you run the exploit. That wasnt the best description of a buffer overflow, however all you need to remember is that garbage data fills up the data registers so then the buffer overflows and allows for remote execution of almost every command available. There are many, many other types of attacks that cannot all be described here, like man-in-the-middle attacks where you spoof who you are.
Performed correctly, the victim will enter http://www.bank.com and his connection will be redirected to your site where you can make a username and password box, make the site look legit. And your poor mark will enter their credentials into your site, when they think its really http://www.bank.com. You need to have a small script set up so it will automatically display like an error or something once they try and log in with their credentials. This makes it seem like the site is down and the victim doesn’t give it a second thought and will simply try again later.
Such an attack is popularly known as “Phishing”

So as a summary of how to own a box when you only have an IP Address
Method Works On BOTH Unix and Windows Boxes

You can do the same with domain names (for example google.com) than what you can with IP Addresses. Run a WHOIS Lookup or something along those lines. Or check up on InterNIC you should be able to resolve the domain name to an IP address. Then follow the usual attack.

• Run a Port Scan the IP Address And Record Open Ports
• Telnet To Open Ports To Identify Software Running On Ports

• Records Banners And Take Note Of The Application Running and The Version Number
• Take a glance at SecurityFocus.com or Eeye.com. If you cant find any vulnerabilities then search google.
• Make a copy of some Proof-Of-Concept code for the vulnerability.

This document does not go into covering your tracks. If you dare try any of this stuff on a box you don’t have consent to hack on, They will simply look at the logs and see your IP Address and then go straight to your ISP.

THE INFORMATION PROVIDED IN THIS POST IS ONLY FOR EDUCATIONAL PURPOSES. THETECHNOFREAK.COM AND/OR THEAUTHOR WILL NOT BE RESPONSIBLE OR ACCOUNTABLE FOR ANY MISUSE BY THE READERS.